Table of Contents
You probably need a blade change if you face issues while cutting materials using your Cricut machine. Using the machine is simple; however, you must check the right guide for ‘how to change cricut blade‘ for perfect outcomes.
Here we have detailed assistance to help you change the blade in Explore Air 2 and Cricut machines. The same technique is applicable for other blades, so you can take the aid of this method for them as well.
How do you know when to change your cricut blade?
Identifying the right time to change the blade is important. Thus, use these essential steps for the best aid.
- Trouble in weeding projects due to cut lines
- The need to change default pressure more often on different projects
- When the Cricut machine fails to work despite applying the correct settings
- If the machine fails to cut designs properly
How often do I need to change my Cricut blade?
Now, the answer to this completely depends on your usage and need. The most notable factors are:
- Usage time of the machine
- Kinds of materials you cut
If you do not use the machine more than once, you could change your blade once in 6 months or even longer. But, if you are using the machine quite often, you may require changes in just a few weeks.
Also, if you cut thick materials, the blade tends to become dull quicker, whereas, in the case of sleek materials, it lasts longer.
Certain materials are shed and can create a mess. Finishing glitter cards or cork assignments, for instance, is very messy and can clog up the blade in just a few minutes. By this, we mean the blade may need cleaning often and even while you are working on the project.
How Can You Change Your Cricut Blade?
One must change or modify their Cricut blade often to ensure the materials are cut with precision.
Every Cricut machine has particular housing combos and blades. So, you may need different assistance depending on your machine. Worry not; we have solutions for all the different blades. Finding the right help will not be tough with this guide.
Step 1: Eradicate the Housing Blade
First, you must eradicate this important part from your Cricut machine blade bundle to proceed. If you have Explore or Maker, you will necessitate a Clamp B opening. If you have an old version of the Cricut machine, you may need to unscrew the black arm that keeps the housing firm. Many users also remove the screw without any tools.
In any case, you need to access the machine’s assembly area. Usually, it is on the outer side of the potter. Thus, open the Cricut machine door, and this will be the first thing you notice.
Once the clamp that fastens the housing is loose, you can remove it effortlessly.
Step 2: Remove the Blade
All blade housings have tiny plungers. Smoothly press the plunger present on the blade housing to loosen the blade. Ensure you note that the blade housing is located over cutting mats or a tiny catch basin. These blades are tiny and, thus, quite simple to release. However, be very careful while replacing the Cricut maker 3 blades bundle as even an expert can make an error here.
Releasing Knife Blades
If you change this blade, place the changing lid on the housing. Next, grab the housing firmly in one hand. At the same house, use the other hand to rotate the changing cap counterclockwise. Further, flip the housing, so the blade is placed perpendicular to the surface. After this, the blade will de-link.
Replacing Rotary Blades
If you have these blades, you may need a changing kit to replace the blades. Keep the changing cap on the housing sleeve and blade. After this, unscrew the bolts. Ensure you don’t remove the old blades or washers. These may appear dull but are still capable of cutting!
Whenever you change the place, ensure you keep the older one in a plastic case. Doing so will protect the blade and make a safe space to discard old blades, which could be helpful in case of emergencies.
Step 3: Prep the New Blade
Get rid of the plastic cover from the new blade if it is not a Rotary or Knife Blade. These blades usually come with changing caps. The caps are built to keep the blade covered every time. Further, they also ensure that the crafters do not injure themselves.
Step 4: Add the New Blade
Put the fresh blade in suitable housing space. If you are replacing Fine-Point or Deep-cut blades, ensure they are firmly placed at the cutting end and then slowly insert it into the socket at the bottom of the housing blade. The magnetic energy holds the blade. Once placed well, only the tip will be visible at the cutting end of the housing.
Replacing Knife-Point Blades
In the case of these blades, keep the fresh blade in the slot available on the base of the housing. You must perfectly align the indent with the grooving on the housing. Change the housing screws, then rotate the cap till it turns firm. After this, remove and throw the changing cap.
Fixing Rotary Blades
If you are changing a circut maker rotary blade, you must put a fresh blade in the slot on the base of the housing. After this, change and fasten the housing nuts that hold the black arm.
Note that all blades must have suitable housings to fit well. Reusing older housing is possible; however, ensure they are not lost or damaged. Also, do not use a congruous housing with a Cricut machine.
Step 5: Replace the Housing
After putting the fresh blade, fix the housing again. In Explore and Maker models, one only needs to slide the housing in clamp B. ensure that the housing is placed right on top of Clamp B. Or, the machine will be unable to cut well. Once the alignment is apt, press clamp B. a little pressure may be necessary here. Once clamp B is shut, it will align with clamp A.
7 Short Tricks – Changing Cricut Maker Blade?
The Cricut blade must be changed frequently depending on the material you use while working on your machine. If there are no crisp cuts, you must identify that the Cricut blade needs a change. Kindly check on these steps to replace the Cricut blade without any issues:
- Disconnect the blade housing from the make.
- Circuit Maker or Cricut Explore: Navigate to Clamp B to open and disconnect the blade housing from it.
- Legacy Cricut devices: remove the screw that holds the blade housing and eradicate it.
- For Deep-Cut and Fine-Point blades: Carefully push the pin on the housing and gently pull the blade on its lower side.
- De-link the protection cover from the fresh blade.
- Put the fresh blade in the housing. The magnetic features will link and hold the blade in its place.
- Swap the blade housing in the device.
Conclusion
Use the steps to make a perfect replacement of your cricut blades. With this assistance, you will avoid damage and unnecessary chaos. Identify the right ways of changing blade on cricut explore air 2 and maker models to make perfect amends.
